Kormee NANODRILL5060TR with MIPO1005 package-1 10250001

www.nanodrill.com

Emission-free directional drilling

A fully electric-powered carrier, specifically developed for the NANODRILL 5060. The tracked carriage transports the Nanodrill to the correct location. Then, the electrically powered powerpack fuels the drilling machine. Completely emission-free drilling without the need for an excavator.

1- 106546 De NaNodrill 5060 TR

The success of the Nanodrill lies in its ability to perform directional drilling with a compact setup. This significantly reduces the machinery and labour costs associated with cable laying projects. Previously, a suitable mini-excavator was required for the operation of the Nanodrill. With the new carrier, the use of an excavator is no longer necessary.

The Nanodrill 5060 TR is electrically powered and fuelled by a battery pack, making the machine emission-free. The tracked vehicle is also equipped with an electrically powered powerpack that operates the Nanodrill 5060. The Nanodrill can be used independently of the carrier on an excavator.

The combination of the Nanodrill with this tracked vehicle is suitable for most common directional drilling tasks. This makes the use of this emission-free machine much more sustainable, as large machines with emissions become unnecessary. Additionally, this combination significantly reduces transport weight.

Specificaties

Dimensions 1,9 x 1,35 x 1,2 meter

Weight 1680Kg

Max. travel speed 3 km/h

Battery capacity 32 kWh 100 Vac

Elektric motor 2.800 Rpm 30 kW

Load capacity 32 Amp - 3 fase 400 Vac

Hydraulisch power 60-90 l/min - 220 bar

Remote control Yes

Bend radius drill rod 6 meter

Torque 750 Nm

Pull and Thrust 6000 kg

Max. RPM 200Rpm Max.

Drill length 80 meter

Max. diameter 320 mm

2- 100585 MIPO 1005 (compleet) 1,00

Electric Mix/pump module 50L/min50Bar

Hose Reel 30Mtr

900L tank

Mix-pump unit with Venturi

3- 106878 Battery pack 10Kva 3-phase 400/230 VAC 1 for MIPO

Battery Pack

Consisting of:

3x LiFePO4 25.6V/200AH

3x Multiplus 24/300/70/16

Smart Batteryprotect 

3 phase charging possible.

Total 15120Wh capacity

In a steel frame with lifting eye and integrated controls.

Dimensions: 800Hx600Bx720L

4- 107110 Measuring system 7T-Tablet-15mm SNS Set Walkover locating system SNS – Tablet Kit1,00 st

Mini Sonde MKt1 (OD – 15mm, Length – 222mm)

5- 107071 Drill rod ø50 5037P+B L3000 PA6 TX 20,00 st.

Drawing: NDRL.024

6- 106947 Locking Pin Rod Adapter 5037 50,00 st.

Drawing: NDRL.0173 Rev: B

7- 107096 Allen set screw M8x8 45H black 50,00 st.

8- 106972 Bentonite adapter 5037P - G1" 1,00 st.

9- 107168 KM Drill head ø50 Nano VM 5-bolt 42B 1,00 st..

The drill head can accommodate 3 types of probes, each type of probe requires fitting blocks.

- DCI 25,4mm probe: 101349

- DCI 18mm probe: 107194 + 107495

- Sense 15mm probe: 101350 + 101351

Drawing: 107168 Rev: A

10- 107169 Adapter 5037B x 42(P) 1,00

11- 101351 Fitiing block SNS Mkt1 Front 1,00

Drawing: BRKP.0041 Rev: B

12- 101350 Fitiing block SNS Mkt1 Back 1,00

Drawing: BRKP.0040 Rev: B

13- 100588 VM Steering Plate RUBBLE 2.5" 5-bolt 3/8"- 16

1,00 st.

14- 106949 KM Stuurplaat 4" - 100mm 5x 3/8"-16 1,00 st.

VM 5-Bolt

Tekening : 106949

15- 100151 KM Steering Plate 5" - 125mm 5x 3/8"-16 1,00 st.

Tekening : 100151 Rev: A

16- 107075 Conical reamer ø90-5037B 4t Swivel 1,00 st.

Tekening : CR090.07

17- 107074 Conical reamer ø120-5037B 4t Swivel 1,00 st.

Tekening : CR120.05

18- 107076 Conical reamer ø150-5037B 4t Swivel 1,00 st.

Tekening : CR150.04

19- 107077 Fly-cutter ø190-5037B 4t Swivel 1,00 st.

Tekening : FC190.04

20- 100126 Locking Pin Drill Mast 2,00 st.

offerte nummer 10250001